Block Mesh/Block Work Reinforcement

Block Work Mesh - is used in block works where extra strength and stability are required as on footings, parapets and localized stress areas. Block works with mesh reinforcement helps the walls to resist stress caused by vibrations and thermal changes. Block work mesh should be used in every alternate course of a wall. Combinations of different widths of block mesh may be used to suit any wall thickness. Block Reinforcement - Ladder Type Ladder Type reinforcement are designed to be embedded in the horizontal mortal joints of masonry walls. It consist of two parallel side rods with cross rods at 16" (400mm) distances thus forming a ladder configuration. Overall measurement side to side approximately 50mm (2") less than the nominal wall thickness to be embedded in masonry. Block Reinforcement - Truss Type Truss type masonry wire reinforcements are designed to embedded in the horizontal mortal joints of masonry walls. It consist of two parallel longitudinal deformed or plain side rods well connected to continuous diagonal formed cross rod forming a truss designs with alternating welds not exceeding 800mm (31"") overall. The cross rods are electrically butt-welded to deformed side rods in a single plane.